Home Old Stuff A Fistful of Costumes-Part Two

A Fistful of Costumes-Part Two

by Daniel J. Hogan

A Fistful of Costumes – Part 2: Shoot to Thrill

Part 1

My non-firing Colt Single Action Army replica (say that ten times fast) arrived Friday afternoon, along with the leather gun belt/holster and 28 solid brass dummy cartridges.

I aim to misbehave.

I aim to misbehave.

I am very happy with the gun, as it looks just like an original Colt–and I think it weights the same too, as it is rather heavy. I’m glad I opted for the longer barrel (that’s what she said), but I imagine “spinning” and quick drawing the shorter barreled version would be easier.

Loading gate open, dummy rounds loaded.

Loading gate open, dummy rounds loaded.

Everything on the gun works, which is really neat. The hammer has two positions, half-cocked (loading) and full cocked (firing). The loading gate pops open and the ejector tube works, although the dummy rounds will usually just fall out if the gun is tilted upward with the gate open (which is the case with a real Colt, I’m sure).

Eject!

Eject!

My only point of concern is that the gun does not have an orange tip, which I think it legally has to for me to wear in public. I can rig something up, I’m sure.

No orange tip, which could make carrying this in public a problem.

No orange tip, which could make carrying this in public a problem.

The dummy rounds are OK, but I thought they would be a bit longer–but they suit the task they were designed for. Some are difficult to eject from the cylinder of the Colt, as they seem to get wedged in a bit. I think once the gun/rounds get broken in a bit more everything will be fine, everything is already starting to work a bit smoother after a couple days of use.

I may not “load” the gun with the dummy rounds when carrying it in public, out of concern of misunderstandings. Better safe than sorry, but we’ll see. If I’m at someone’s house for a party indoors, that’s one thing–but if I’m walking around a convention or something, well I may leave the dummy rounds out.

The belt and holster however, were a big disappointment–not in regards to the construction, which is fine, but the decoration. The bad job is down right horrible. In the photos I viewed online, the paint job appeared more blended in and uniform. With my belt, it looks like someone just ran a black brush along the edges–or that a the last step was skipped. Considering I paid a little over $40 for this belt, I was not happy. But in terms of functionality, the belt/holster work just fine.

I am not happy with the lameo paint job on this holster.  The pictures on the Internet led me to believe these colors would be blended in a bit better.

I am not happy with the lameo paint job on this holster. The pictures on the Internet led me to believe these colors would be blended in a bit better.

The loops don’t always keep the cartridges secure, but I knew about that ahead of time. I picked up some putty that I’ll use to secure the cartridges in the belt. I’m torn as it if I should keep the entire belt filled or only about half or so–with several empty loops between cartridges. I think the look of having less cartridges might be a bit more interesting, as it hints at some of the ammo being used.

I also picked up the a poncho at a local Halloween shop (which upon spotting some weeks ago was the inspiration for this costume). Yes, this isn’t the exact same thing Eastwood wears in Fistful of Dollars, but I don’t care. It is close enough and at least a similar color (yes, it is green despite sometimes looking brown in the films).

Not the exact design, but itll do.

Not the exact design, but it'll do.

My next quest is finding a decent hat and a pair of boots. For these, I want to go cheap–which I quickly realizing might not be an option. After visiting three resale places and a slew of shoe places, I am currently trying to get a pair of boots on eBay. Again, they don’t have to be exactly what Eastwood had. I just want an affordable pair of boots I can wear spurs with (which I found at a store, but haven’t bought yet).

The hat is a whole other challenge. Eastwood doesn’t wear a typical cowboy hat in Fistful of dollars and finding anything even remotely close is proving to be expensive. I have some options locally, so I’ll hold off a bit, hoping to see if I can score something on eBay–but I’m hesitant to buy a hat on eBay because I won’t know how it’ll fit until it arrives. I may have to suck it up and drop a bunch on a hat..or just say the heck with it and get a cheaper one that is only kind of close. I saw one today at Gander Mountain for $30 that was pretty close (but black).

As far as the rest of the costume, I commissioned my mom to make me a vest–doesn’t have to be hide like in the film, just a light tan material is fine. I have a shirt and jeans that are close enough…and other than that, all I need is cloth for the scarf he wears and the trademark cigars (someone I know already recommended a brand to try).

Finding a hat like that is a problem. Mom is making me the vest, I have a shirt and jeans. Just need a black scarf and cigars. Image © United Artists

Finding a hat like that is a problem. Mom is making me the vest, I have a shirt and jeans. Just need a black scarf and cigars. Image © United Artists

1 comment

A Fistful of Costumes – Part Three — Daniel J. Hogan October 13, 2009 - 12:11 am

[…] Part One :: Part Two […]

Comments are closed.