Skip to content
Jul 13 / Daniel

Photographing Fireworks

The Fourth of July was this past week, and with it came my first chance to try and take photos of fireworks.

Lansing Fireworks 3

More after the break

The trick with taking photos of fireworks is that you need a long exposure, which means you need a tripod to cut down on camera shake. I found an OK spot to shoot from and set up my tripod. It helped that the fireworks had already started, so I at least knew which direction to aim.

Lansing Fireworks 3

I used my 18-55mm lens. I briefly toyed with using my zoom, but realized I would need the wide angle to get all of the explosions.

I set my camera to Full Manual (M) mode (nothing Auto will work here) and tweaked my settings. I set my ISO to 100, my f-stop to around f10 (at least for the shot below). I tried different exposures. The setting for the photo below was 8 seconds.

Lansing Fireworks 1

The one problem, as you can see in the shot below, is that some were really overexposed. But, this was still a fun project.
Lansing Fireworks 2

I used some really long exposures for a few shots, such as a minute or longer.  I did try a trick I read online–during the really long exposures, I would hold my black camera bag over the lens in between the fireworks going off. I don’t know what this did, if anything, but it was a fun trick to try.  I think the idea is that it help cuts down the exposure.

I’m normally bored by fireworks, but this made watching fireworks fun again :)

Related Posts Plugin for WordPress, Blogger...

One Comment

Trackbacks and Pingbacks

  1. Monday Links and Photo! | Daniel J. Hogan

Comments are closed.